Stainless Steel Wire Mesh

HOME / SCREEN MESH MATERIALS / Woven Wire Mesh / Stainless Steel Wire Mesh

Durable and Corrosion-Resistant Stainless Steel Wire Mesh for Precision Filtration, Structural Support, and Industrial Screening Applications

Stainless steel wire mesh is a versatile, high-performance material known for its excellent strength, corrosion resistance, and durability. Made from premium stainless steel grades such as 304 and 316, it is ideal for use in demanding environments including filtration, screening, sieving, and protective barriers. The mesh is woven with precision to ensure consistent openings and reliable performance, even under high pressure or extreme temperatures. Commonly used in industries such as chemical processing, food production, mining, and construction, stainless steel mesh offers long service life, easy maintenance, and resistance to rust, acids, and alkalis—making it a dependable solution for critical applications.

According to the chemical composition, stainless steel can be divided into different grades including AISI 302, 304, 304L, 316, 316L, 321, 310, 904L, etc.

Weave Types Available

Plain Weave

Plain Weave is the simplest and most common weave pattern for woven wire mesh. In this design, each wire passes alternately over and under one wire in both the warp (longitudinal) and weft (transverse) directions, forming a criss-cross pattern with square openings. This straightforward structure provides a good balance between filtration and flow rate, making it suitable for applications where moderate particle retention and consistent flow are required. Its inherent strength and durability also make it a reliable choice for general-purpose filtration tasks.

Twill Weave

Twill Weave is a more intricate pattern where each wire passes over two wires and under two wires, with an offset in each row that creates a distinctive diagonal appearance. This design allows for a tighter mesh with smaller openings compared to Plain Weave, even when using wires of the same diameter. As a result, Twill Weave offers finer filtration while maintaining higher flow rates due to its increased open area. It is ideal for applications requiring enhanced particle retention without significantly compromising fluid throughput.

Plain Dutch Weave

Plain Dutch Weave introduces a variation by using wires of different diameters: thicker warp wires and thinner weft wires. The weft wires are woven in a plain weave pattern—over and under one warp wire—but the differing wire sizes produce slot-like, rather than square, openings. This structure excels at retaining very small particles while still allowing a relatively high flow rate, making it a popular choice for fine filtration needs. The thicker warp wires also contribute to good durability, enhancing its suitability for demanding applications.

Twill Dutch Weave

Twill Dutch Weave combines the Dutch weave concept with a twill pattern. Like Plain Dutch Weave, it uses thicker warp wires and thinner weft wires, but the weft wires pass over and under two warp wires with an offset, similar to Twill Weave. This results in an even tighter mesh than Plain Dutch Weave, enabling finer filtration capabilities. Additionally, Twill Dutch Weave can withstand higher pressures and maintain good flow rates, making it well-suited for applications requiring precise filtration under challenging conditions.

Reversed Plain Dutch Weave

Reversed Plain Dutch Weave (RPDW) is a specialized woven wire mesh where the warp wires are thinner and more numerous (higher mesh count) compared to the thicker, less frequent weft wires. Unlike standard Plain Dutch Weave, which uses thicker warp wires and thinner weft wires, RPDW reverses this arrangement. The weaving follows a plain weave pattern, with each weft wire passing alternately over and under one warp wire, creating triangular, slot-like openings. This structure provides a tight mesh ideal for fine filtration.

5-Heddle Weave

5-Heddle Weave is a specialized pattern that creates a herringbone-like structure through a complex arrangement of wires. This weave allows for a high wire density, resulting in extremely fine openings and superior filtration capabilities. Its smooth surface is an added benefit, reducing clogging and facilitating cleaning in certain applications. 5-Heddle Weave is typically employed in high-precision filtration tasks where retaining very small particles is critical, such as in advanced industrial or scientific processes.

Materials Chemical Composition

Stainless Steel Material Chemical Composition (%)
Grade	C (%)	Si (%)	Mn (%)	P (%)	S (%)	Cr (%)	Ni (%)	Mo (%)	N (%)	Cu (%)	Material Properties
201	≤0.15	≤1.00	5.5–7.5	≤0.060	≤0.030	16.0–18.0	3.5–5.5	—	—	—	High manganese, economical austenitic type, suitable for low corrosion environments
302	≤0.15	≤1.00	≤2.00	≤0.045	≤0.030	17.0–19.0	8.0–10.0	—	—	—	Austenitic type with strength similar to 304, slightly higher carbon content
304	≤0.08	≤1.00	≤2.00	≤0.045	≤0.030	18.0–20.0	8.0–10.5	—	≤0.10	—	Most common stainless steel, good corrosion resistance and workability
304L	≤0.03	≤1.00	≤2.00	≤0.045	≤0.030	18.0–20.0	8.0–12.0	—	≤0.10	—	Low-carbon version of 304, better weldability and resistance to intergranular corrosion
310	≤0.25	≤1.50	≤2.00	≤0.045	≤0.030	24.0–26.0	19.0–22.0	—	—	—	High-temperature stainless steel, excellent oxidation resistance up to 1100°C
310S	≤0.08	≤1.50	≤2.00	≤0.045	≤0.030	24.0–26.0	19.0–22.0	—	—	—	Low-carbon version of 310, improved weldability
316	≤0.08	≤1.00	≤2.00	≤0.045	≤0.030	16.0–18.0	10.0–14.0	2.0–3.0	≤0.10	—	Molybdenum-bearing austenitic steel, enhanced resistance to pitting and crevice corrosion
316L	≤0.03	≤1.00	≤2.00	≤0.045	≤0.030	16.0–18.0	10.0–14.0	2.0–3.0	≤0.10	—	Low-carbon version of 316, suitable for welded structures
317L	≤0.03	≤1.00	≤2.00	≤0.045	≤0.030	18.0–20.0	11.0–15.0	3.0–4.0	≤0.10	—	Higher Mo and Ni content than 316L, further enhanced corrosion resistance
430	≤0.12	≤1.00	≤1.00	≤0.040	≤0.030	16.0–18.0	≤0.75	—	—	—	Ferritic type, magnetic, lower cost, less corrosion-resistant than 304
904L	≤0.02	≤1.00	≤2.00	≤0.045	≤0.035	19.0–23.0	23.0–28.0	4.0–5.0	≤0.10	1.0–2.0	Super austenitic, high Ni and Mo, excellent corrosion resistance, often used in chemical processing

Advantages of Stainless Steel Woven Wire Mesh

Stainless steel woven wire mesh offers several advantages:

Corrosion Resistance: Ideal for use in harsh environments, including marine and chemical exposure.
Strength and Durability: Withstands high pressure and mechanical stress.
Heat Resistance: Performs well in high-temperature conditions.
Hygienic and Easy to Clean: Suitable for food-grade and pharmaceutical applications.
Precision and Stability: Uniform weave ensures consistent filtration and sizing.
Non-reactive Surface: Compatible with sensitive materials and does not contaminate products.

Specification of Stainless Steel Woven Wire Mesh

Specification of Plain Weave Stainless Steel Wire Mesh

Stainless Steel Plain Weave Wire Mesh
Mesh Count (Warp x Weft)	Wire Diameter		Mesh Opening		Open Area
–	Inch	mm	Inch	mm	%
1 × 1	0.08	2.03	0.92	23.37	85
1 × 1	0.118	3	0.882	22.4	78
2 × 2	0.063	1.6	0.437	11.1	76
2 × 2	0.059	1.5	0.441	11.2	78
3 × 3	0.054	1.37	0.279	7.09	70
3 × 3	0.047	1.2	0.286	7.27	74
4 × 4	0.039	1	0.211	5.35	71
4 × 4	0.047	1.19	0.203	5.16	66
4 × 4	0.063	1.6	0.187	4.75	56
5 × 5	0.039	1	0.161	4.08	65
5 × 5	0.041	1.04	0.159	4.04	63
6 × 6	0.035	0.9	0.131	3.33	62
6 × 6	0.035	0.89	0.132	3.35	62
7 × 7	0.031	0.8	0.111	2.83	61
8 × 8	0.028	0.71	0.097	2.46	60
10 × 10	0.025	0.64	0.075	1.91	56
10 × 10	0.024	0.6	0.076	1.94	58
12 × 12	0.023	0.584	0.06	1.52	52
12 × 12	0.02	0.508	0.063	1.6	58
12 × 12	0.022	0.55	0.062	1.57	55
14 × 14	0.023	0.584	0.048	1.22	46
14 × 14	0.02	0.508	0.051	1.3	52
16 × 16	0.018	0.457	0.0445	1.13	51
16 × 16	0.02	0.5	0.043	1.09	47
18 × 18	0.017	0.432	0.0386	0.98	48
18 × 18	0.02	0.5	0.036	0.91	42
20 × 20	0.02	0.508	0.03	0.76	36
20 × 20	0.016	0.406	0.034	0.86	46
20 × 20	0.016	0.4	0.034	0.87	47
20 × 20	0.018	0.45	0.032	0.82	42
24 × 24	0.014	0.356	0.0277	0.7	44
24 × 24	0.014	0.35	0.028	0.71	45
30 × 30	0.013	0.33	0.0203	0.52	37
30 × 30	0.012	0.305	0.0213	0.54	41
30 × 30	0.009	0.229	0.0243	0.62	53
30 × 30	0.01	0.25	0.023	0.6	50
40 × 40	0.01	0.254	0.015	0.38	36
40 × 40	0.008	2	0.017	0.44	3
50 × 50	0.009	0.229	0.011	0.28	30
50 × 50	0.008	0.203	0.012	0.31	37
50 × 50	0.007	0.18	0.013	0.33	42
60 × 60	0.0075	0.191	0.0092	0.23	30
60 × 60	0.007	0.178	0.0097	0.25	34
60 × 60	0.006	0.16	0.01	0.26	38
60 × 60	0.007	0.19	0.009	0.23	30
70 × 70	0.0065	0.165	0.0078	0.2	30
70 × 70	0.005	0.12	0.01	0.24	44
80 × 80	0.0065	0.165	0.006	0.15	23
80 × 80	0.005	0.12	0.008	0.2	39
80 × 80	0.005	0.13	0.007	0.19	35
90 × 90	0.005	0.127	0.0061	0.16	31
100 × 100	0.0045	0.114	0.0055	0.14	30
100 × 100	0.004	0.102	0.006	0.15	35
100 × 100	0.0035	0.089	0.0065	0.17	43
100 × 100	0.004	0.1	0.008	0.15	36
100 × 100	0.004	0.11	0.006	0.14	31
110 × 110	0.004	0.102	0.0051	0.13	31
120 × 120	0.0037	0.094	0.0064	0.12	31
120 × 120	0.002	0.06	0.007	0.18	56
120 × 120	0.004	0.09	0.005	0.12	33
120 × 120	0.002	0.058	0.008	0.15	52
120 × 120	0.003	0.08	0.005	0.13	38
140 × 140	0.003	0.07	0.004	0.11	37
145 × 145	0.002	0.045	0.005	0.13	55
150 × 150	0.0026	0.066	0.0041	0.1	37
150 × 150	0.002	0.06	0.004	0.11	42
150 × 150	0.002	0.05	0.005	0.12	50
160 × 160	0.0025	0.064	0.0038	0.1	36
160 × 160	0.002	0.05	0.004	0.11	47
160 × 160	0.002	0.04	0.005	0.12	56
160 × 160	0.001	0.035	0.005	0.12	60
165 × 165	0.002	0.05	0.004	0.1	44
180 × 180	0.0023	0.058	0.0033	0.08	35
180 × 180	0.002	0.05	0.004	0.09	41
180 × 180	0.002	0.04	0.004	0.1	51
200 × 200	0.0021	0.053	0.0029	0.07	34
200 × 200	0.002	0.053	0.003	0.07	32
200 × 200	0.002	0.05	0.003	0.08	38
200 × 200	0.002	0.04	0.003	0.09	48
220 × 220	0.002	0.05	0.003	0.07	34
230 × 230	0.001	0.035	0.003	0.08	48
230 × 230	0.001	0.03	0.003	0.08	53
250 × 250	0.0016	0.041	0.0024	0.06	36
250 × 250	0.002	0.04	0.002	0.06	36
250 × 250	0.001	0.035	0.003	0.07	44
250 × 250	0.001	0.03	0.003	0.07	49
270 × 270	0.0016	0.041	0.0021	0.05	32
270 × 270	0.001	0.035	0.002	0.06	40
270 × 270	0.001	0.03	0.003	0.06	44
280 × 280	0.001	0.035	0.002	0.06	40
300 × 300	0.0051	0.038	0.0018	0.05	30
300 × 300	0.001	0.03	0.002	0.05	39
325 × 325	0.0014	0.036	0.0017	0.04	30
325 × 325	0.001	0.025	0.002	0.05	44
325 × 325	0.001	0.028	0.002	0.05	41
325 × 325	0.001	0.03	0.002	0.05	39
350 × 350	0.001	0.022	0.002	0.05	48
370 × 370	0.001	0.022	0.002	0.05	48
400 × 400	0.001	0.025	0.0015	0.038	88
400 × 400	0.001	0.022	0.002	0.04	42
420 × 420	0.001	0.022	0.002	0.04	42
450 × 450	0.001	0.02	0.001	0.04	44
500 × 500	0.001	0.025	0.001	0.03	25
635 × 635	0.0008	0.02	0.0008	0.02	25

Specification of Twill Weave Stainless Steel Wire Mesh

Stainless Steel Twill Weave Wire Mesh
Mesh Count (Warp x Weft)	Wire Diameter		Mesh Opening		Open Area
–	Inch	mm	Inch	mm	%
1 × 1	0.08	2.03	0.92	23.37	85
2 × 2	0.063	1.6	0.437	11.1	76
3 × 3	0.054	1.37	0.279	7.09	70
4 × 4	0.063	1.6	0.187	4.75	56
4 × 4	0.047	1.19	0.203	5.16	66
5 × 5	0.041	1.04	0.159	4.04	63
6 × 6	0.035	0.89	0.132	3.35	62
8 × 8	0.028	0.71	0.097	2.46	60
10 × 10	0.025	0.64	0.075	1.91	56
10 × 10	0.02	0.51	0.08	2.03	64
12 × 12	0.023	0.584	0.06	1.52	52
12 × 12	0.02	0.508	0.063	1.6	58
14 × 14	0.023	0.584	0.048	1.22	46
14 × 14	0.02	0.508	0.051	1.3	52
16 × 16	0.018	0.457	0.0445	1.13	51
18 × 18	0.017	0.432	0.0386	0.98	48
20 × 20	0.02	0.508	0.03	0.76	36
20 × 20	0.016	0.406	0.034	0.86	46
24 × 24	0.014	0.356	0.0277	0.7	44
30 × 30	0.013	0.33	0.0203	0.52	37
30 × 30	0.012	0.305	0.0213	0.54	41
30 × 30	0.009	0.229	0.0243	0.62	53
35 × 35	0.011	0.279	0.0176	0.45	38
40 × 40	0.01	0.254	0.015	0.38	36
50 × 50	0.009	0.229	0.011	0.28	30
50 × 50	0.008	0.203	0.012	0.31	37
60 × 60	0.0075	0.191	0.0092	0.23	30
60 × 60	0.007	0.178	0.0097	0.25	34
70 × 70	0.0065	0.165	0.0078	0.2	30
80 × 80	0.0065	0.165	0.006	0.15	23
80 × 80	0.0055	0.14	0.007	0.18	32
90 × 90	0.005	0.127	0.0061	0.16	31
100 × 100	0.0045	0.114	0.0055	0.14	30
100 × 100	0.004	0.102	0.006	0.15	35
100 × 100	0.0035	0.089	0.0065	0.17	43
110 × 110	0.004	0.1016	0.0051	0.13	31
120 × 120	0.0037	0.094	0.0064	0.117	31
150 × 150	0.0026	0.066	0.0041	0.104	37
150 × 150	0.07	0.0028	0.0993	0.004	34
160 × 160	0.0025	0.0635	0.0038	0.097	36
165 × 165	0.058	0.0023	0.0959	0.004	39
180 × 180	0.0023	0.0584	0.0033	0.084	35
180 × 180	0.058	0.0023	0.0831	0.003	35
200 × 200	0.0021	0.0533	0.0029	0.074	34
200 × 200	0.058	0.0023	0.069	0.003	29
225 × 225	0.05	0.002	0.0629	0.003	31
235 × 235	0.045	0.0018	0.0631	0.003	34
250 × 250	0.0016	0.0406	0.0024	0.061	36
250 × 250	0.04	0.0016	0.0616	0.002	36
270 × 270	0.0016	0.0406	0.0021	0.053	32
270 × 270	0.04	0.0016	0.0541	0.002	32
280 × 280	0.04	0.0016	0.0507	0.002	31
300 × 300	0.04	0.0016	0.0447	0.002	28
300 × 300	0.038	0.0015	0.0467	0.002	30
300 × 300	0.0051	0.0381	0.0018	0.046	30
300 × 300	0.035	0.0014	0.0497	0.002	35
315 × 315	0.035	0.0014	0.0456	0.002	32
325 × 325	0.0014	0.0356	0.0017	0.043	30
325 × 325	0.035	0.0014	0.0432	0.002	30
350 × 350	0.035	0.0014	0.0376	0.002	27
350 × 350	0.03	0.0012	0.0426	0.002	34
363 × 363	0.03	0.0012	0.04	0.002	33
400 × 400	0.001	0.0254	0.0015	0.37	88
400 × 400	0.025	0.001	0.0385	0.002	36
400 × 400	0.028	0.0011	0.0355	0.001	31
400 × 400	0.03	0.0012	0.0335	0.001	27
450 × 450	0.025	0.001	0.0314	0.001	30
500 × 500	0.001	0.0254	0.001	0.025	25
500 × 500	0.025	0.001	0.0258	0.001	25
510 × 510	0.025	0.001	0.0248	0.001	25
530 × 530	0.024	0.0009	0.0239	0.001	25
635 × 635	0.02	0.0008	0.02	0.001	25
795 × 795	0.015	0.0006	0.017	0.001	28

Specification of Plain Dutch Weave Stainless Steel Wire Mesh

Stainless Steel Plain Dutch Weave Wire Mesh
Mesh Count (Warp x Weft)	Wire Diameter (Warp × Weft)		Filter Rating
–	inch	mm	μm
6 × 44	0.0394 × 0.0236	1.0 × 0.60	320
7 × 50	0.0276 × 0.0213	0.70 × 0.54	315
8 × 60	0.0217 × 0.0177	0.55 × 0.45	280
8 × 62	0.0248 × 0.0177	0.63 × 0.45	385
10 × 79	0.0197 × 0.0140	0.5 × 0.355	306
12 × 64	0.0228 × 0.0157	0.58 × 0.4	297
14 × 88	0.0157 × 0.0118	0.4 × 0.3	235
19 × 140	0.0124 × 0.0079	0.315 × 0.2	120
20 × 300	0.0138 × 0.0079	0.35 × 0.2	172
24 × 110	0.0140 × 0.0098	0.355 × 0.25	115
25 × 140	0.0110 × 0.0079	0.28 × 0.2	100
30 × 150	0.0098 × 0.0071	0.25 × 0.18	122
35 × 175	0.0088 × 0.0063	0.224 × 0.16	106
40 × 200	0.0079 × 0.0055	0.18 × 0.14	92
45 × 250	0.0063 × 0.0044	0.16 × 0.112	80
50 × 250	0.0055 × 0.0043	0.14 × 0.11	72
60 × 300	0.0055 × 0.0035	0.14 × 0.09	62
65 × 330	0.0043 × 0.0031	0.11 × 0.08	56
70 × 350	0.0043 × 0.0031	0.11 × 0.08	53
78 × 400	0.0043 × 0.0028	0.11 × 0.07	49
80 × 400	0.0039 × 0.0026	0.1 × 0.065	46

Specification of Twill Dutch Weave Stainless Steel Wire Mesh

Stainless Steel Twill Dutch Weave Wire Mesh
Model	Mesh Count	Warp Wire Diameter		Weft Wire Diameter		Porosity	Thickness		Weight	Filter Rating
–	–	Inch	mm	Inch	mm	%	Inch	mm	kg/m²	μm
TDW-43200	14 × 128	0.02	0.5	0.016	0.4	43	0.052	1.31	5.81	200
TDW-51200	18 × 210	0.018	0.457	0.01	0.254	51	0.042	1.06	4.28	200
TDW-59100	18 × 330	0.02	0.5	0.007	0.18	59	0.046	1.18	3.8	100
TDW-40110	20 × 216	0.011	0.27	0.01	0.25	40	0.032	0.82	3.82	110
TDW-41100	20 × 250	0.01	0.25	0.009	0.22	41	0.026	0.66	3.35	100
TDW-42108	20 × 260	0.018	0.45	0.009	0.22	42	0.04	1.01	4.16	108
TDW-46105	25 × 160	0.016	0.4	0.012	0.3	46	0.039	1	4.6	105
TDW-4090	30 × 250	0.01	0.25	0.008	0.2	40	0.026	0.65	3.1	90
TDW-3990	30 × 360	0.01	0.25	0.006	0.15	39	0.024	0.6	2.49	90
TDW-3675	40 × 250	0.01	0.25	0.009	0.22	36	0.028	0.72	3.65	75
TDW-5265	40 × 550	0.007	0.18	0.004	0.1	52	0.017	0.43	1.7	65
TDW-4050	50 × 250	0.01	0.25	0.008	0.2	40	0.028	0.7	3.28	50
TDW-4945	60 × 700	0.006	0.165	0.003	0.076	49	0.016	0.4	1.42	45
TDW-4235	80 × 700	0.004	0.1	0.003	0.076	42	0.011	0.27	1.21	35
TDW-4230	110 × 850	0.004	0.09	0.003	0.065	42	0.009	0.24	1.12	30
TDW-2918	165 × 1100	0.003	0.07	0.002	0.044	29	0.007	0.17	0.75	18
TDW-3015	165 × 1400	0.003	0.07	0.002	0.04	30	0.006	0.15	0.76	15
TDW-3313	200 × 1400	0.003	0.07	0.002	0.04	33	0.006	0.15	0.76	13
TDW-3209	250 × 1370	0.002	0.058	0.002	0.043	32	0.006	0.14	0.84	9
TDW-3907	325 × 1900	0.001	0.035	0.001	0.027	39	0.004	0.1	0.45	7
TDW-3410	325 × 1900	0.001	0.038	0.001	0.028	34	0.004	0.09	0.49	10
TDW-3008	325 × 2300	0.001	0.038	0.001	0.025	30	0.003	0.09	0.47	8
TDW-3503	375 × 2300	0.001	0.032	0.001	0.025	35	0.004	0.09	0.46	3
TDW-3302	400 × 2800	0.001	0.029	0.001	0.023	33	0.003	0.07	0.45	2
TDW-3401	500 × 3600	0.001	0.025	0.001	0.017	34	0.002	0.05	0.34	1

Specification of Reverse Plain Dutch Weave Stainless Steel Wire Mesh

Stainless Steel Reversed Plain Dutch Weave Wire Mesh
Mesh Count	Warp Wire Diameter		Weft Wire Diameter		Porosity	Thickness		Weight	Filter Rating
–	Inch	mm	Inch	mm	%	Inch	mm	kg/m²	μm
66 × 18	0.012	0.3	0.016	0.4	66	0.042	1.07	2.22	200
84 × 25	0.013	0.32	0.016	0.4	49	0.043	1.09	3.09	150
130 × 30	0.008	0.2	0.018	0.45	53	0.032	0.82	2.82	100
130 × 35	0.008	0.2	0.016	0.4	56	0.03	0.75	2.7	80
175 × 40	0.006	0.15	0.014	0.35	58	0.022	0.55	2.24	104
175 × 45	0.006	0.15	0.013	0.32	56	0.024	0.62	2.16	100
175 × 50	0.006	0.15	0.012	0.3	53	0.022	0.56	2.14	60
290 × 60	0.004	0.09	0.009	0.23	50	0.016	0.4	1.36	50
290 × 74	0.004	0.09	0.008	0.2	52	0.014	0.36	1.27	40

Specification of Reversed Dutch Twill Weave Stainless Steel Wire Mesh

Stainless Steel Reversed Dutch Twill Weave Wire Mesh
Mesh Count (Warp x Weft)	Warp Wire Diameter		Weft Wire Diameter		Porosity	Thickness		Weight	Filter Rating
Inch	Inch	mm	Inch	mm	%	Inch	mm	kg/m²	μm
72 × 15	0.018	0.45	0.018	0.45	58	0.069	1.75	4.43	400
132 × 16	0.014	0.022	0.022	0.56	45	0.049	1.25	5.4	350
132 × 16	0.014	0.352	0.018	0.457	58	0.049	1.24	4.9	250
132 × 18	0.014	0.355	0.018	0.455	57	0.052	1.31	4.65	200
152 × 24	0.012	0.315	0.014	0.355	42	0.047	1.2	4.53	165
160 × 24	0.012	0.305	0.016	0.4	42	0.043	1.09	4.68	150
160 × 25	0.012	0.315	0.016	0.4	39	0.043	1.1	4.97	145
228 × 36	0.007	0.19	0.011	0.28	47	0.026	0.67	2.71	100
260 × 40	0.006	0.15	0.009	0.22	53	0.024	0.62	1.98	125
325 × 39	0.006	0.15	0.012	0.3	43	0.028	0.7	2.71	55
400 × 120	0.003	0.065	0.004	0.1	61	0.01	0.26	0.72	60

Specification of 5-Heddle Weave Stainless Steel Wire Mesh

Stainless Steel 5-Heddle Weave Wire Mesh
Mesh Count	Wire Diameter	Thickness	Weight
Warp/Inch × Weft/Inch	mm	mm	kg/m²
15 × 13	0.90 × 0.90	2.6	5.67
24 × 20	0.60 × 0.60	1.7	3.96
28 × 17	0.47 × 0.47	1.41	2.53
30 × 18	0.50 × 0.50	1.48	3
48 × 25	0.30 × 0.30	0.82	1.64
48 × 45	0.29 × 0.29	0.83	2
55 × 36	0.30 × 0.30	0.84	2.05
65 × 36	0.30 × 0.30	0.84	2.27
77 × 40	0.24 × 0.24	0.68	1.65
80 × 60	0.20 × 0.20	0.55	1.4
107 × 59	0.16 × 0.16	0.45	1.09
107 × 125	0.16 × 0.14	0.45	1.27
107 × 132	0.16 × 0.14	0.44	1.3
132 × 85	0.14 × 0.20	0.44	1.47

Applications of Stainless Steel Woven Wire Mesh

Thanks to its versatility and reliability, stainless steel woven wire mesh is used in a wide range of industries, including:

Filtration: In water treatment, oil refining, chemical processing, and air purification.
Screening and Sieving: For mining, agriculture, food processing, and pharmaceuticals.
Security and Safety: As fencing, window guards, or machine guards.
Automotive and Aerospace: For fluid filtration and component protection.
Electronics: As shielding in EMI/RFI applications.

Stainless Steel Woven Wire Mesh for Water Treatment

Stainless Steel Woven Wire Mesh for Oil Refining

Stainless Steel Woven Wire Mesh for Plastic Industry

Stainless Steel Woven Wire Mesh for Fluid Filtration

Stainless Steel Woven Wire Mesh for Chemical Processing

Stainless Steel Woven Wire Mesh for Air Purification

Stainless Steel Woven Wire Mesh for Mining

Stainless Steel Woven Wire Mesh for Food Processing

Stainless Steel Woven Wire Mesh for EMI RFI Shielding

Request A Quote

* indicates required fields